Share this post on:

Of the AhDGAT2 gene, its full-length open reading frame (ORF) was amplified with genespecific primers (AhD2-FS: 59 TCAACAGCCACCGAATCCA 39 and AhD2-FA: 59 TAAAACAAGGAAGGGTGCCA 39). The 20 mL PCR volume comprised 1 mL cDNA, 1 mL of each primer (10 mM), 2 mL PCR buffer (106), 4 mL dNTPs (2.5 mM each), and 1 unit of Pfu DNA polymerase. The reaction was denatured at 94uC for 5 min; followed by 30 cycles of 30 s at 94uC, 30 s at 60uC, and 1 min 20 s at 72uC; then 10 min at 72uC. The full length fragment (AhDGAT2 ORF) was 4EGI-1 site purified from an agarose gel and cloned into a pMD18-T vector for sequencing. Translations of the full-length ORF sequences were analyzed for structural motifs. Transmembrane helices were predicted using TMHMM (http://www.cbs.dtu.dk/services/TMHMM/), conserved domains were found using the Conserved Domain Database (http://www.ncbi.nlm.nih.gov/Structure/cdd/wrpsb. cgi) at the National Center for Biotechnology Information (NCBI), and putative functional motifs were identified using PROSCAN (http://npsa-pbil.ibcp.fr/K162 chemical information cgi-bin/npsa_automat.pl?page = /NPSA/ npsa_proscan.html). We also predicted the two- and threedimensional structures of the genes using phyre2 (http://www.sbg. bio.ic.ac.uk/phyre2/html/page.cgi?id = index).Phylogenetic analysesTo better understand the evolutionary origins of the AhDGAT2s, their protein sequences were aligned with those of other DGAT2 genes obtained from NCBI. Homologous sequences in GenBank were identified by a protein BLAST with E-value.6e149. A multiple sequence alignment using hydrophilic and residuespecific penalties was conducted in DNAMAN 6.0 software (Lynnon Biosoft, Quebec, Canada), which was also used to reconstruct a phylogenetic tree using the OBSERVED DIVERGENCY distance 15481974 method and default parameters. Two sequences from monocots, Zea mays and Oryza sativa, were used as outgroups. Statistical support for the tree was gauged using 500 bootstrap replicates.Materials and Methods Cloning of the full-length peanut DGAT2 cDNATotal RNA (5 mg) from peanut cultivar `Luhua 14′ pods obtained 25 days after flowering (DAF) was reverse-transcribed into first-strand cDNAs using a cDNA synthesis kit (Invitrogen, Carlsbad, CA, USA) in a 20 mL reaction volume. Examination of the conserved domains of soybean GmDGAT2 and RcDGAT2 nucleotide sequences enabled us to design a pair of primers (AhD2-S: 59 TCTTACACCAGCAACAAGGAAA 39 and AhD2A: 59 GACCAAAGCAGAAAACAGGAAC 39) (Sangon Co., Shanghai, China) that successfully amplified a 15755315 197-bp fragment of the gene. The 20 mL PCR mixture contained 1 mL cDNA, 1 mL of each primer (10 mM), 2 mL PCR buffer (106), 2 mL dNTPs (2.5 mM each), and 1 unit of Pyrococcus furiosus (Pfu) DNA polymerase (Invitrogen). The reaction was denatured at 94uC for 5 min; followed by 30 cycles of 30 s at 94uC, 30 s at 50uC, and 30 s at 72uC; then 10 min at 72uC. PCR was performed in a PCR Thermal Cycler Dice-TP600 (Takara, Otsu, Japan). The AhDGAT2 fragment was purified using a MinEluteTM Gel Extraction Kit (Qiagen, Hilden, Germany), cloned into a pMD18-T vector (Takara), and sequenced. The full-length AhDGAT2 from `Luhua 14′ was cloned using a SMARTTM RACE cDNA Amplification Kit (Clontech, Mountain View, CA, USA). Total RNA (1 mg) from the 25-DAF peanut pods was used for cDNA synthesis following the manufacturer’s protocol. Rapid amplification of cDNA ends (RACE) primers were based on the sequence of the AhDGAT2 fragment described above as follows: AhD2-3O (59 TCTTACACCAGCAACAAGGAAA 39) and AhD2.Of the AhDGAT2 gene, its full-length open reading frame (ORF) was amplified with genespecific primers (AhD2-FS: 59 TCAACAGCCACCGAATCCA 39 and AhD2-FA: 59 TAAAACAAGGAAGGGTGCCA 39). The 20 mL PCR volume comprised 1 mL cDNA, 1 mL of each primer (10 mM), 2 mL PCR buffer (106), 4 mL dNTPs (2.5 mM each), and 1 unit of Pfu DNA polymerase. The reaction was denatured at 94uC for 5 min; followed by 30 cycles of 30 s at 94uC, 30 s at 60uC, and 1 min 20 s at 72uC; then 10 min at 72uC. The full length fragment (AhDGAT2 ORF) was purified from an agarose gel and cloned into a pMD18-T vector for sequencing. Translations of the full-length ORF sequences were analyzed for structural motifs. Transmembrane helices were predicted using TMHMM (http://www.cbs.dtu.dk/services/TMHMM/), conserved domains were found using the Conserved Domain Database (http://www.ncbi.nlm.nih.gov/Structure/cdd/wrpsb. cgi) at the National Center for Biotechnology Information (NCBI), and putative functional motifs were identified using PROSCAN (http://npsa-pbil.ibcp.fr/cgi-bin/npsa_automat.pl?page = /NPSA/ npsa_proscan.html). We also predicted the two- and threedimensional structures of the genes using phyre2 (http://www.sbg. bio.ic.ac.uk/phyre2/html/page.cgi?id = index).Phylogenetic analysesTo better understand the evolutionary origins of the AhDGAT2s, their protein sequences were aligned with those of other DGAT2 genes obtained from NCBI. Homologous sequences in GenBank were identified by a protein BLAST with E-value.6e149. A multiple sequence alignment using hydrophilic and residuespecific penalties was conducted in DNAMAN 6.0 software (Lynnon Biosoft, Quebec, Canada), which was also used to reconstruct a phylogenetic tree using the OBSERVED DIVERGENCY distance 15481974 method and default parameters. Two sequences from monocots, Zea mays and Oryza sativa, were used as outgroups. Statistical support for the tree was gauged using 500 bootstrap replicates.Materials and Methods Cloning of the full-length peanut DGAT2 cDNATotal RNA (5 mg) from peanut cultivar `Luhua 14′ pods obtained 25 days after flowering (DAF) was reverse-transcribed into first-strand cDNAs using a cDNA synthesis kit (Invitrogen, Carlsbad, CA, USA) in a 20 mL reaction volume. Examination of the conserved domains of soybean GmDGAT2 and RcDGAT2 nucleotide sequences enabled us to design a pair of primers (AhD2-S: 59 TCTTACACCAGCAACAAGGAAA 39 and AhD2A: 59 GACCAAAGCAGAAAACAGGAAC 39) (Sangon Co., Shanghai, China) that successfully amplified a 15755315 197-bp fragment of the gene. The 20 mL PCR mixture contained 1 mL cDNA, 1 mL of each primer (10 mM), 2 mL PCR buffer (106), 2 mL dNTPs (2.5 mM each), and 1 unit of Pyrococcus furiosus (Pfu) DNA polymerase (Invitrogen). The reaction was denatured at 94uC for 5 min; followed by 30 cycles of 30 s at 94uC, 30 s at 50uC, and 30 s at 72uC; then 10 min at 72uC. PCR was performed in a PCR Thermal Cycler Dice-TP600 (Takara, Otsu, Japan). The AhDGAT2 fragment was purified using a MinEluteTM Gel Extraction Kit (Qiagen, Hilden, Germany), cloned into a pMD18-T vector (Takara), and sequenced. The full-length AhDGAT2 from `Luhua 14′ was cloned using a SMARTTM RACE cDNA Amplification Kit (Clontech, Mountain View, CA, USA). Total RNA (1 mg) from the 25-DAF peanut pods was used for cDNA synthesis following the manufacturer’s protocol. Rapid amplification of cDNA ends (RACE) primers were based on the sequence of the AhDGAT2 fragment described above as follows: AhD2-3O (59 TCTTACACCAGCAACAAGGAAA 39) and AhD2.

Share this post on:

Author: Proteasome inhibitor